Magnetic field in current conductor according to electromagnetic causality
According to James Clerk Maxwell's equations there are four equations in advanced mathematical form for electromagnetic causality. And we can follow that to talk about the magnetic field on the current-carrying conductor created by the electric field in the conductor. That means the variable electric field creates a magnetic field.
According to Maxwell's retarded electromagnetic and electromagnetic causality theory, for the transformation to be "electromagnetic waves", a periodic varying electric field is required. And basically, if there is no harmonic varying electric or magnetic field, the changing electric field produces a magnetic field and vice versa obeys a restricted mathematical equation.
 |
| Magnetic fields are generated on current-carrying conductors in the form of straight conductors and coils |
With today's 50 - 60Hz alternating current of the mains, it is clear that there is an electric field that is oscillating harmonically. Then the electromagnetic wave must be emitted from a straight conductor. However this did not happen. Instead, a vortex magnetic field has a Magnetic Induction Vector that changes in magnitude, but remains eddy (the line of magnetic induction is circular when a straight wire has alternating current).
If you carry a high-value charged object (units of Coulomb) on a car that is moving at high speed, there is a changing electric field in space. According to Maxwell, there must be a generated magnetic field. So where is the magnetic field created? Obviously there isn't.
Because of that, many scholars ask: What Generates The Magnetic Field In A Current Carrying Wire?
It is possible that today's electromagnetic science based on Maxwell's theory is only a subjective description of the will. Because according to Logic and intellect, there are other possibilities that have not been considered. I will therefore refer to a scholar who has studied this issue, Oleg D. Jefimenko, below.
In his book "Causality, Electromagnetic Induction, and Gravitation A Different Approach to the Theory of Electromagnetic and Gravitational Fields" by Oleg D. Jefimenko, answers the question: What generates the magnetic field in a current carrying wire?
Summary of the content of the book via video:
The Ether Field In A Current Carrying Wire is the correct answer
Faraday's magnetic field is the dielectric, a ground state of the Ether. Specifically, a magnetic field is a dielectric field that has lost energy or inertia.
That is the statement of Ken Wheeler after studying the works of Nikola Tesla and many other great minds.
Ken Wheeler[1] has new insights based on experiments and theories from truth-seeking scientists (excluding Einstein and the pillars of "Satan science")
On straight or coiled conductors, the presence of current means that there is a change in the dielectric over time in the conductor mounted in the "Aether's Space". It's basically the dielectric that loses its inertia that generates a magnetic field.
In the measured geometry, the circular magnetic induction line has the magnetic induction vector B as a tangent. We do not see this field with the naked eye, instead we use iron filings and test magnets to judge.
According to the Ether theory of Ken Wheeler and Eric Dollard based on the works of Nikola Tesla and Charles Proteus Steinmetz, it is the electric current that generates the magnetic field as shown above.
Qualitative understanding: That circle is the eddy current of Ether due to dielectric loss of inertia/energy.
Quantitative understanding: Current is the conjugation between two states of Ether, dielectric with value Ψ and magnetic with value Φ, which are conjugated in Ether with the mathematical model of Ψ representing "counter space"[2] and Φ represents space. This conjugation is represented by the formula Ψ.Φ = Q (unit is Planck )
Thus, the actual transmission of electricity does not require the theory of electrons. Metal conductors are just routing dielectric materials for the Ether. To be more precise, there are not any electrons moving or oscillating during the transmission of electricity. Electrons don't exist
Today's national grid alternating current transmission system requires conductor pairs to create Ψ and conjugates to create a better Ether routing. If a conductor is used, power transmission is extremely expensive and considered impossible. Electrical conductors today are in the form of cables with at least 2 wires twisted together. One more routing is two wires with a distance of about 40cm on the high voltage line.
 |
| Routing on Ether for Power Transmission (AC) |
The space in the Ether is thought of differently from the Cartesian Space of modern science. They programmed kids to think about "space" the way they wanted to be in science.
Some articles on Electricity and Magnetic fields:
Revealed At Last...
Free Energy Magnetic Generator and synthesizes many other technologies imbued with Nikola Tesla's technological identity
✔ Nikola Tesla’s method of magnifying electric power by neutralizing the magnetic counter-forces in an electric generator
Generates Energy-On-Demand: 👉 Free Energy Will Change Our World Forever
✔ Combination of induction motor and alternator
✔ Combine generators with induction motors - self-powered generators with rotary motion
✔ Various methods of generating high power immobile generators
✔ Or maybe called Overunity for the system. Mother Nature doesn't care about people calling or naming phenomena. Overunity/Free Energy, Zero Point Energy (ZPE) are just a few different words
Note:
[1] More information about Ken Wheeler: The Nature of Gravity in Ether - The Truth About Gravity
[2] More information about "Counter-space":
Energy in its most arch-typical form is embodied in the phenomenon of Electricity, but what is Electricity? Now our wheels even more stuck in the mud! But we have important clues, namely that of polarity, not plus or minus so much but more like male or female. This thought follows from Goethe to Tesla and Steinmetz. Thus Electricity, in order to manifest, a UNION must develop. This is the union of the “male”, or projective, and “multiplied by” the “female”, or receptive. Hereby, the male is the dielectric field in counterspace (of per centimeters), and the magnetic field or female in space (of centimeters squared). Space in c.m. squared is what you pay for in “real estate”, counterspace in per c.m. is the space between the lines on a ruler, or between molecules in a crystal.
For the Electricity extant between a pair of wires in your lamp cord, the closer the wires, the more capacitance, and thus the more Dielectricity. Conversely, for the same cord, the farther apart the wires, the more inductance and thus the more Magnetism. Therefore it is seen that the smaller the space (the more counterspace) the more Dielectricity that can be stored, and conversely the larger the space between the wires (the more real estate) the more Magnetism that can be stored. Very simple, do not let your mind make it any more complicated than that!
Now let us reach out for a few quantitative relations: The product (line, cross, or dot – unrestricted) of the total amount of Dielectricity multiplied by the total amount of Magnetism (when both are in union) gives the total quantity of Electricity. We will call this quantity of Electricity the letter “Q” and name this “The Planck” after Max Planck. For the Einstein dimensions of the Planck are Energy – Time, but let us not think backwards – ass. Saying this in engineers lingo, the quantity of Electricity, Q, is given as Watt – Seconds – Seconds, or Watt Seconds squared. by Eric Dollard: A Common Language for Electrical Engineering: Lone Pine Writings